Complete Home Rewiring Services

Upgraded electrical wiring is a desirable feature in homes and can add value. It’s also safer and can prevent tripped breakers and other problems caused by overloaded circuits.

A full rewire usually includes installing a new 200 amp electrical panel and properly sized outlets in each room. Depending on the location of the old wiring, it may be possible to rewire without removing any drywall. For a professional service, contact New Home Construction Nashville experts.



Wiring can be a major undertaking for any home. It involves stripping out old wiring and running new wires throughout your house. A licensed electrician will then install a new circuit breaker panel and ensure that all building codes are met. Some states require a permit before the project can begin, and that additional cost can increase your final bill.

Some of the most obvious signs that your wiring needs an upgrade are flickering lights or a tripping breaker. Other symptoms include outlets that heat when plugged in, strange buzzing sounds, and a loss of power to a specific room or device. It’s essential to get your wiring upgraded as soon as possible so that you don’t experience any of these problems.

When it comes to rewiring your home, the average price is around $1,300 to $3,000. However, this cost can vary widely depending on several factors. The number of rooms in your home and the type of wiring will affect your total cost. For instance, a kitchen or bathroom will require GFCIs and more powerful outlets than other rooms in your house. These extra costs can add up, especially if your home is older and you need to open up walls to access the wiring.

Other cost considerations include whether or not your electrical system is outdated. For example, some older homes have 60-amp systems that aren’t sufficient for today’s devices and appliances. A complete rewiring can involve installing a 200-amp system, which adds to the overall project cost. In addition, you may need to replace your fuse box and upgrade your fixtures. Some states also have different requirements for the type of wire used in your home. For instance, if you have knob-and-tube or aluminum wiring, your insurance company may decline coverage.

Fuse Box

The wires that bring electricity into your home go through a box on the wall called a fuse box. Every light fixture, outlet, and appliance has a wire that goes to the fuse box. This receptacle protects your family from electrical fires. That’s why your parents and grandparents warned you not to “blow a fuse.”

A fuse box uses small round glass or ceramic bulbs (or plugs) with metal casings that plug into the main fuse box. When there is a problem, the fuse’s thin wire filament melts and breaks the circuit. This stops the flow of electricity, preventing damage and fires. If you have a blown fuse, it is important to replace it with a new one that matches its size and voltage. You can purchase replacement fuses at your local hardware store.

However, it is best to have a professional electrician replace the fuse box with a circuit breaker. Modern homes require more amperage than old fuse boxes can handle. Plus, a circuit breaker has switches with on and off labels so you can quickly reset tripped fuses.

When a fuse box is replaced with a circuit breaker, the electrician must remove the existing wiring to connect to the new panel. This involves opening up walls and cutting into the framing to access the old wires. This can be expensive and disruptive.

In addition, the existing wiring may need to be replaced because it is worn or damaged. The cost of replacing the old wiring will vary depending on the extent of the work and whether it requires trenching or drywall repairs. If the wires need to be buried, it can cost $6 per linear foot for an electrician to dig and replace them.


If your home has old, knob-and-tube wiring or round fuses, it’s time to call an electrician for a whole-home rewire. This upgrade can reduce the risk of house fires, increase your home’s value, lower electricity bills, and improve electrical capacity.

The cost of rewiring depends on the size and layout of your home, as well as how many switches, outlets, and fixtures you want to install. The average rewiring costs $6 to $10 per square foot, including labor and materials. However, it’s important to consider hidden costs when evaluating a rewiring bid.

For example, if your electrician finds rot, mold, or other damage while opening up walls, those expenses will need to be addressed before the new wires can be connected. If you’re rewiring an older home, it may also be necessary to change out the framing to accommodate modern equipment.

Rewiring an entire home is a major job that requires shutting off the power and removing drywall to expose the existing wiring. This can be expensive, and it’s recommended that you stay with family or friends or at a hotel while the work is being done.

Having your home rewired might feel like a headache while it’s being completed, but it will save you from the stress of dealing with house fires and other safety hazards. Replacing outdated or dangerous wiring can prevent a fire, save lives, and increase your home’s value. It can also help you qualify for mortgage loans and keep your insurance rates affordable. If your circuit breakers frequently trip, lights flicker, or the switches feel warm to the touch, you should schedule a rewiring appointment with an electrician. A professional will be able to assess your home’s needs and advise you of the best options for your budget.


If you’re tired of running out of outlets in your home or you’re worried about the safety of old wiring, consider upgrading to a complete rewire. A full rewire includes upgrading your electricity to 200 amps with a new circuit breaker panel to distribute the power throughout your home. It also includes safety features like breaker-based GFCI and AFCI outlets to protect against electrical shock. This is a great way to add value to your home and ensure it’s up to code for years to come.

Rewiring a house can be costly but it’s worth it to avoid electrical fires, faulty wiring, and dangerous conditions. Flickering lights, buzzing outlets, and tripped breakers are common signs of electrical problems that may require rewiring.

Many pre-1950 homes have ungrounded, knob-and-tube wiring that is a fire hazard. These porcelain connectors can be easily damaged by water and heat, which increases the risk of a fire. Rewiring an older house typically includes replacing these outdated wires, upgrading the circuit breaker panel, and installing new switches, outlets, and light fixtures.

A rewiring project will likely require a permit and inspections. These are usually included in the cost of the rewiring and take place before the electrician connects the new wires to your switches, outlets, and light fixtures.

Depending on your home’s layout and how difficult it is to access the wiring, the total cost of rewiring can vary significantly. For example, some homes have plaster walls instead of drywall and may require opening up sections of walls to access the wiring. This will increase the labor and repair costs of rewiring the entire house. Also, if you’re living in the home during rewiring, you’ll incur extra daily cleanup and moving expenses.

Light Fixtures

Adding new lighting fixtures is a great way to improve the look and feel of any room. It’s also a great way to make rooms easier to navigate and to save on electricity costs. But installing or repairing these light fixtures isn’t easy. It’s best to leave the work to a professional electrician who is familiar with wiring.

A good indicator that your home needs rewiring is when your lights start flickering. It may just mean that the bulbs are nearing their end of life or that there is a power outage in your area, but if these factors have been ruled out and your lights continue to flicker, it could be a sign that there is loose wiring in your home.

Other signs to watch out for are buzzing or humming sounds coming from your fixtures. These noises can be caused by damaged wires that are releasing free-flowing currents, which is dangerous and needs to be fixed right away. You should also watch out for scorch marks on outlets and switches. These are jet-black and indicate that the wiring is overheating.

If you’re considering a remodel or a renovation project, consider having us install new light fixtures for you. Our experienced team can help you select the perfect fixtures for your space and install them according to the electrical codes of your area. We can also handle the complex electric wiring systems that lie above your light fixtures, ensuring you get the look and functionality you’re hoping for. For more information, contact us today to request a quote.